Whole-Home Remodel cost › Collier County
Whole-Home Remodel Cost in Collier County, FL (2026)
Planning a whole-home remodel in Naples, Marco Island, Immokalee? A mid-range project of 1,800 home floor area (sq ft) typically runs $27,000–$270,000. Public sources do not publish reliable county-level price indices, so the ranges below are regional; local quotes may land higher or lower.
Estimate your project
Get 3 local quotes
Free, no obligation. Licensed contractors in your area contact you.
Cost by finish level
| Finish level | Installed cost | Source |
|---|---|---|
| Basic: Standard updates | $15–$60 per sq ft | HomeGuide - Home Renovation Costs (2026) |
| Mid: Extensive updates | $15–$150 per sq ft estimate | HomeGuide - Home Renovation Costs (2026) |
| High: Full gut and remodel | $70–$150 per sq ft | HomeGuide - Home Renovation Costs (2026) |
Mid tier spans both HomeGuide ranges (widened estimate).
Collier County permit notes
Interior remodels that touch plumbing, electrical, or walls need a building permit in Florida. Cosmetic-only work (paint, cabinet fronts) usually does not.
- Collier County charges a minimum $100 application fee. Source
- Third-party estimate: about $316.50 for a 200 sq ft residential remodel permit and about $388.25 for a 2,000 sq ft re-roof (estimate, verify with county). Source
FAQ
How much does a whole-home remodel cost in Collier County?
Using public 2025-2026 cost-guide data, a mid-range whole-home remodel of 1,800 sq ft runs about $27,000 to $270,000 installed. Basic work starts around $15 per sq ft and high-end work can reach $150 per sq ft. These are estimates, not quotes.
Do I need a permit for a whole-home remodel in Collier County?
Interior remodels that touch plumbing, electrical, or walls need a building permit in Florida. Cosmetic-only work (paint, cabinet fronts) usually does not.
Are these prices exact quotes?
No. They are planning ranges compiled from public sources such as HomeGuide and the Remodeling Cost vs Value report. Get written quotes from at least three licensed contractors.
Why are Florida prices different?
Florida building code wind-load and hurricane requirements, product approvals, insurance, and post-storm labor demand can push costs to the upper part of national ranges.