Tile Roof Replacement cost › Collier County
Tile Roof Replacement Cost in Collier County, FL (2026)
Planning a tile roof replacement in Naples, Marco Island, Immokalee? A mid-range project of 2,000 roof area (sq ft) typically runs $14,000–$50,000. Public sources do not publish reliable county-level price indices, so the ranges below are regional; local quotes may land higher or lower.
Estimate your project
Get 3 local quotes
Free, no obligation. Licensed contractors in your area contact you.
Cost by finish level
| Finish level | Installed cost | Source |
|---|---|---|
| Basic: Concrete tile | $7–$25 per sq ft estimate | HomeGuide - Cost to Tear Off and Replace a Roof (2026) |
| Mid: Clay / Spanish tile | $7–$25 per sq ft estimate | HomeGuide - Cost to Tear Off and Replace a Roof (2026) |
| High: Premium tile | $7–$25 per sq ft estimate | HomeGuide - Cost to Tear Off and Replace a Roof (2026) |
Source gives one $7-$25/sq ft range for tile; tiers are not split.
Collier County permit notes
Re-roofing requires a permit and inspections in every Florida county. Ask about a wind-mitigation inspection afterward; it can lower insurance premiums.
- Collier County charges a minimum $100 application fee. Source
- Third-party estimate: about $316.50 for a 200 sq ft residential remodel permit and about $388.25 for a 2,000 sq ft re-roof (estimate, verify with county). Source
FAQ
How much does a tile roof replacement cost in Collier County?
Using public 2025-2026 cost-guide data, a mid-range tile roof replacement of 2,000 sq ft runs about $14,000 to $50,000 installed. Basic work starts around $7 per sq ft and high-end work can reach $25 per sq ft. These are estimates, not quotes.
Do I need a permit for a tile roof replacement in Collier County?
Re-roofing requires a permit and inspections in every Florida county. Ask about a wind-mitigation inspection afterward; it can lower insurance premiums.
Are these prices exact quotes?
No. They are planning ranges compiled from public sources such as HomeGuide and the Remodeling Cost vs Value report. Get written quotes from at least three licensed contractors.
Why are Florida prices different?
Florida building code wind-load and hurricane requirements, product approvals, insurance, and post-storm labor demand can push costs to the upper part of national ranges.