Pool Deck Resurfacing / Pavers cost › Collier County
Pool Deck Resurfacing / Pavers Cost in Collier County, FL (2026)
Planning a pool deck resurfacing / pavers in Naples, Marco Island, Immokalee? A mid-range project of 600 deck area (sq ft) typically runs $7,200–$13,200. Public sources do not publish reliable county-level price indices, so the ranges below are regional; local quotes may land higher or lower.
Estimate your project
Get 3 local quotes
Free, no obligation. Licensed contractors in your area contact you.
Cost by finish level
| Finish level | Installed cost | Source |
|---|---|---|
| Basic: Resurface / cool-deck overlay | $5–$14 per sq ft | New Age Construction - Pool Deck Resurfacing Cost |
| Mid: Concrete pavers | $12–$22 per sq ft | EstimateFlorida - Pool Deck Cost Estimator (FL 2026) |
| High: Travertine pavers | $18–$30 per sq ft | EstimateFlorida - Pool Deck Cost Estimator (FL 2026) |
Collier County permit notes
Resurfacing usually needs no permit; new pavers or structural changes may. Check with your county.
- Collier County charges a minimum $100 application fee. Source
- Third-party estimate: about $316.50 for a 200 sq ft residential remodel permit and about $388.25 for a 2,000 sq ft re-roof (estimate, verify with county). Source
FAQ
How much does a pool deck resurfacing / pavers cost in Collier County?
Using public 2025-2026 cost-guide data, a mid-range pool deck resurfacing / pavers of 600 sq ft runs about $7,200 to $13,200 installed. Basic work starts around $5 per sq ft and high-end work can reach $30 per sq ft. These are estimates, not quotes.
Do I need a permit for a pool deck resurfacing / pavers in Collier County?
Resurfacing usually needs no permit; new pavers or structural changes may. Check with your county.
Are these prices exact quotes?
No. They are planning ranges compiled from public sources such as HomeGuide and the Remodeling Cost vs Value report. Get written quotes from at least three licensed contractors.
Why are Florida prices different?
Florida building code wind-load and hurricane requirements, product approvals, insurance, and post-storm labor demand can push costs to the upper part of national ranges.