Metal Roof Replacement Cost in Southwest Florida (2026)
A typical mid-range metal roof replacement (2,000 roof area (sq ft)) costs about $10,000–$32,000 installed, based on public 2025–2026 cost data. Use the estimator below for your size, county, and finish level.
Estimate your project
Get 3 local quotes
Free, no obligation. Licensed contractors in your area contact you.
Cost by finish level
| Finish level | Installed cost | Source |
|---|---|---|
| Basic: Steel/Galvalume (low end) | $5–$16 per sq ft estimate | HomeGuide - Cost to Tear Off and Replace a Roof (2026) |
| Mid: Standing seam (mid) | $5–$16 per sq ft estimate | HomeGuide - Cost to Tear Off and Replace a Roof (2026) |
| High: Premium metals | $5–$16 per sq ft estimate | HomeGuide - Cost to Tear Off and Replace a Roof (2026) |
Source gives one $5-$16/sq ft range for all metal types; tiers are not split.
Permits
Re-roofing requires a permit and inspections in every Florida county. Ask about a wind-mitigation inspection afterward; it can lower insurance premiums.
By county
- Metal Roof Replacement cost in Lee County
- Metal Roof Replacement cost in Collier County
- Metal Roof Replacement cost in Charlotte County
- Metal Roof Replacement cost in Sarasota County
- Metal Roof Replacement cost in Manatee County
- Metal Roof Replacement cost in Hillsborough County
- Metal Roof Replacement cost in Pinellas County
FAQ
How much does a metal roof replacement cost in Southwest Florida?
Using public 2025-2026 cost-guide data, a mid-range metal roof replacement of 2,000 sq ft runs about $10,000 to $32,000 installed. Basic work starts around $5 per sq ft and high-end work can reach $16 per sq ft. These are estimates, not quotes.
Do I need a permit for a metal roof replacement in Florida?
Re-roofing requires a permit and inspections in every Florida county. Ask about a wind-mitigation inspection afterward; it can lower insurance premiums.
Are these prices exact quotes?
No. They are planning ranges compiled from public sources such as HomeGuide and the Remodeling Cost vs Value report. Get written quotes from at least three licensed contractors.
Why are Florida prices different?
Florida building code wind-load and hurricane requirements, product approvals, insurance, and post-storm labor demand can push costs to the upper part of national ranges.